Technical Specifications
Acoustic Performance
Configuration: Powered subwoofer, ported
Frequency Response (-3 dB): 45 Hz - 250 Hz
Maximum Peak SPL: 135 dB
Crossover Frequency: 90 Hz
Transducer
LF Transducer: 1x18" Ferrite
Voice Coil Diameter: 4"
Amplifier
Type: Class D
Total Power Output: 2,000W Peak (1,000 RMS)
LF Power: 2 x 500W bridged (1000W total)
Cooling: Free air convection
Rated THD: <0.05% (20 Hz - 20 kHz)
Dynamic Range: 119 dB (A-weighted)
Bandwidth: 20 Hz - 20 kHz
Connections and Controls
Input Channels: 2 line
Input Connector Types: 2 combo
Line Input Impedance: 10 kO
Maximum Input: +22 dBu
Output Connector: 2 XLR (M): Mix out, Direct out
Controls: Output Level, Low Pass Filter, Preset Select, Polarity Invert On/Off, Mono On/Off, Front LED On/Off
Indicators: DSP Preset, Polarity Invert On/Off, Mono On/Off, Front LED On/Off, Signal, Clip, Thermal
DSP
Presets: Extended LF
Polarity: Normal or Reverse
Bit Depth: 24-bit
Sample Rate: 96 kHz
Enclosure
Material: 18 mm Baltic birch
Finish: ChemlineTM polyurethane
Grille Powder-coated steel
Dimensions (HxDxW): 22.5" x 24.5" x 25" (572 mm x 622 mm x 635 mm)
Unit Weight: 95 lbs. (43 kg)
Handles: 2 (One on each side)
Safety
Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection: limiter
Power
AC Power Input: 100-230V~, 50-60 Hz
AC Power Consumption (1/8 Power): 150W
Suspension Mounting
Rigging Points: 12 M10
Mounting: Ground stack provisions
