Technical Specifications
Acoustic Performance
Configuration: 2-way biamped
Frequency Response (-3 dB): 52 Hz - 18 kHz
Nominal Coverage (-6 dB): 110° x 50°
Maximum Peak SPL: 136 dB
Crossover Frequency: 1.6 kHz
Transducer
LF Transducer: 1x15" Ferrite
Voice Coil Diameter: 2.5"
HF Transducer: 1.75" compression driver
Amplifier
Type: Class D
Total Power Output: 1,300W Peak (650 RMS)
LF Power: 1,000W Peak (500W RMS)
HF Power: 300W Peak (150W RMS)
Cooling: Free air convection
Rated THD: <0.05% (20 Hz - 20 kHz)
Dynamic Range: 119 dB (A-weighted)
Bandwidth: 20 Hz - 20 kHz
Connections and Controls
Input Channels: 1 mic/line, 1 line
Input Connector Types: 2 combo
Mic Input Impedance: 1 kO
Line Input Impedance: 10 kO
Maximum Input: +22 dBu
Output Connector: 2 XLR (M): Mix out, Direct out
Controls: Mic/Line Level, Line/Level, Preset Select, HPF On/Off, Front LED On/Off
Indicators: DSP Preset, HPF On/Off, Front LED On/Off, Signal, Clip, Thermal
DSP
Presets: FOH, MON, DJ
HPF: 100 Hz, 4th-order Linkwitz-Riley
Bit Depth: 24-bit
Sample Rate: 96 kHz
Enclosure
Material: 15 mm Baltic birch
Finish: ChemlineTM polyurethane
Grille: Powder-coated steel
Dimensions (HxDxW): 28.5" x 17.25" x 16" (234 mm x 438 mm x 406 mm)
Unit Weight: 59 lbs. (26.8 kg)
Handles: 3 (Top and Sides)
Monitor Angle: 30°
Safety
Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection: limiter
Power
AC Power Input: 100-230V~, 50-60 Hz
AC Power Consumption (1/8 Power): 150W
Suspension Mounting
Rigging Points: 12 M10
Mounting: 35 mm, 2-position
